Description

Closed Board Fencing Kit Timber Posts

Strong and wind resistant closed board fencing for any garden. Simply select your height of fence and the length of fence kit required. Closed board fencing is proven to be tough against winds over traditional fence panel methods. Supplied in form of components, closed board fences are easy to install using our below guides. Choose from several heights of fencing to suit your requirements. Fixings included with each kit purchased.

Your Fencing Kit Includes:

• 100mm x 100mm Timber Fence Posts supplied every 3.0m (posts supplied 0.6m longer than selected fence height to allow for concreting into the ground)
• Fence Rails 3.0m x 88mm x 38mm
• Gravel Boards 3.0m x 150mm x 22mm
• Capping Rails 3.0m x 60mm x 30mm
• 150mm Wide Feather Edge Boards.
• Galvanised Nails
• All of our timber is pressure treated with Tanalith E preservative.

How To Buy Closed board Fencing

Firstly select your finished fence height above ground. Then select the length of fence kit you require to fill the gap in your boundary. Always round up to the nearest size to ensure you have enough materials. Every fence kit can be trimmed down to suit your gap. All timbers and fixings are supplied for you to install your new garden fence. Helpful spec sheets on closed board fence kits can be found below.

Closed Board Fence Spec / Installation Guides

• 0.9m (3ft) High Fence Spec
• 1.2m (4ft) High Fence Spec
• 1.5m (5ft) High Fence Spec
• 1.8m (6ft) High Fence Spec
• 2.0m (6ft 6″) High Fence Spec
• 2.4m (8ft) High Fence Spec

How to install a closed board fence blog.

For all other closed board fencing supplies you can find them in the fencing components category.